setTelemetryValue(id, subID, instance, value [, unit [, precision [, name]]])
@status current Introduced in 2.2.0
idId of the sensor, valid range is from 0 to 0xFFFF
subIDsubID of the sensor, usually 0, valid range is from 0 to 7
instanceinstance of the sensor (SensorID), valid range is from 0 to 0xFF
valuefed to the sensor
unitunit of the sensor Full list
precisionthe precision of the sensor
0 or not presentno decimal precision.
!= 0value is divided by 10^precision, e.g. value=1000, prec=2 => 10.00.
name(string) Name of the sensor if it does not yet exist (4 chars).
not presentName defaults to the Id.
presentSensor takes name of the argument. Argument must have name surrounded by quotes: e.g., "Name"
true,if the sensor was just added. In this case the value is ignored (subsequent call will set the value)
All three parameters
instance can't be zero at the same time. At least one of them
must be different from zero.