model.getMix(channel, line)

Get configuration for specified Mix

@status current Introduced in 2.0.0, parameters below multiplex added in 2.0.13

Parameters

  • channel (unsigned number) channel number (use 0 for CH1)

  • line (unsigned number) mix number (use 0 for first line(mix))

Return value

  • nil requested channel or line does not exist

  • table mix data:

    • name (string) mix line name
    • source (number) source index
    • weight (number) weight (1024 == 100%) value or GVAR1..9 = 4096..4011, -GVAR1..9 = 4095..4087
    • offset (number) offset value or GVAR1..9 = 4096..4011, -GVAR1..9 = 4095..4087
    • switch (number) switch index
    • multiplex (number) multiplex (0 = ADD, 1 = MULTIPLY, 2 = REPLACE)
    • curveType (number) curve type (function, expo, custom curve)
    • curveValue (number) curve index
    • flightModes (number) bit-mask of active flight modes
    • carryTrim (boolean) carry trim
    • mixWarn (number) warning (0 = off, 1 = 1 beep, .. 3 = 3 beeps)
    • delayUp (number) delay up (time in 1/10 s)
    • delayDown (number) delay down
    • speedUp (number) speed up
    • speedDown (number) speed down

results matching ""

    No results matching ""