model.getOutput(index)

Get servo parameters

@status current Introduced in 2.0.0

Parameters

  • index (unsigned number) output number (use 0 for CH1)

Return value

  • nil requested output does not exist

  • table output parameters:

    • name (string) name
    • min (number) Minimum % * 10
    • max (number) Maximum % * 10
    • offset (number) Subtrim * 10
    • ppmCenter (number) offset from PPM Center. 0 = 1500
    • symetrical (number) linear Subtrim 0 = Off, 1 = On
    • revert (number) irection 0 = ­­­---, 1 = INV
    • curve
      • (number) Curve number (0 for Curve1)
      • or nil if no curve set

results matching ""

    No results matching ""