lcd.drawGauge(x, y, w, h, fill, maxfill [, flags])

Draw a simple gauge that is filled based upon fill value

@status current Introduced in 2.0.0, changed in 2.2.0

Parameters

  • x,y (positive numbers) top left corner position

  • w (number) width in pixels

  • h (number) height in pixels

  • fill (number) amount of fill to apply

  • maxfill (number) total value of fill

  • flags (unsigned number) drawing flags

Return value

none

Examples

lcd/drawGauge-example

local function run(event)
  lcd.clear()
  lcd.drawText(1,1,"drawGauge() example", 0)
  lcd.drawGauge(1, 11, 120, 25, 250, 1000)
end

return{run=run}

Last updated