model.getOutput(index)

Get servo parameters

@status current Introduced in 2.0.0

Parameters

  • index (unsigned number) output number (use 0 for CH1)

Return value

  • nil requested output does not exist

  • table output parameters:

  • name (string) name

  • min (number) Minimum % * 10

  • max (number) Maximum % * 10

  • offset (number) Subtrim * 10

  • ppmCenter (number) offset from PPM Center. 0 = 1500

  • symetrical (number) linear Subtrim 0 = Off, 1 = On

  • revert (number) irection 0 = ­­­---, 1 = INV

  • curve

    • (number) Curve number (0 for Curve1)

    • or nil if no curve set

Last updated